PRODUCT / PERFORMANCE BATTEN · PATENT PENDING
A SMALL DETAIL.
A BETTER CAVITY.
A 190 × 35 × 30 mm polypropylene cavity spacer with integrated butyl backing. Ready to position beneath roof and wall support battens, with separation and fixing-point sealing in one component.


01
Clearance
fixing slot
fixing slot
02
Pre-drilled
fixing holes
fixing holes
03
Honeycomb design
for strength and
reduced weight
for strength and
reduced weight
04
Butyl backing to help seal
fixing penetrations
fixing penetrations
05
Full-length
drainage channel
drainage channel
190 × 35 × 30 mm / Polypropylene / Integrated butyl backing / Patent pending
01
Clearance fixing slot
02
Pre-drilled fixing holes
03
Honeycomb design for strength and reduced weight
04
Butyl backing to help seal fixing penetrations
05
Full-length drainage channel
100 BATTENS PER BOX · PATENT PENDING
READY TO POSITION.
Individual 190 mm units are easy to handle and position at the required support locations. The 30 mm height creates a defined cavity between the membrane and support system.
PB30. In detail.
Product type
Counter batten / cavity spacer
Material
Polypropylene
Dimensions
190 × 35 × 30 mm
Cavity height
30 mm
Seal
Integrated butyl backing
Applications
Roof / wall
Moisture resistance
Highly moisture resistant
Pack quantity
100 pieces
Colour
Black
Patent status
Patent pending

PB30 product view
About 21 MB. Loads automatically in view.0%Use left and right arrow keys to rotate and up and down arrow keys to tilt. Page Up shows directly above; Page Down shows directly below. Home returns to the initial angle. Escape resumes automatic movement.
01 / VENTILATE
VENTILATE
Creates 30 mm separation that gives air room to move through the designed roof or wall cavity.
02 / DRAIN
DRAIN
Provides a pathway for incidental moisture to move through and exit the cavity.
03 / PROTECT
PROTECT
Integrated butyl backing helps seal membrane penetrations around the fixing point.

PACK QUANTITY
100 BATTENS.
ONE BOX.
Short, lightweight modules are easy to handle and position at the specified support locations.

INTEGRATED BUTYL BACKING
FIX. SEAL. DONE.
Integrated butyl backing compresses beneath the support batten to help seal around membrane fixing penetrations.
The sealing material arrives with the spacer, keeping positioning and fixing-point protection together in one component.
NCC 2025 / CAVITY DETAILING
Build in separation.
Bring the detail together.
NCC 2025 gives drained and ventilated wall cavities, and roof-space ventilation, a clearer role in moisture-management design. PB30 brings a defined 30 mm separation component to the fixing locations in your coordinated roof or wall assembly.
Ready-to-position modules and integrated butyl backing keep the spacer and fixing-point seal together. Explore the relevant cavity clauses and practical drawing and installation priorities in our NCC 2025 guide.
PERFORMANCE BATTENS
Build the cavity.
Protect the detail.
Bring cavity separation and fixing-point sealing together in your roof or wall detail.
190 × 35 × 30 mm · Polypropylene · Butyl backed · 100 per box · Patent pending
Getting the best from PB30
Use PB30 within your approved roof or wall detail, with structural support battens, compatible membranes and the specified fixings and butyl compression. Coordinate cavity openings, drainage and the adopted NCC and fire requirements with your project team. Illustrations explain the product’s role; the project documents provide the construction detail.




