
ROOF + WALL / 30 MM CAVITY SYSTEM
Build in space.
Let moisture out.
PB30 creates a defined 30 mm cavity at roof and wall fixing points. Ready-to-position polypropylene modules with integrated butyl backing help bring drainage, ventilation detailing and penetration sealing together.
190 × 35 × 30 mm / 100 per box · Patent pending

01
Clearance
fixing slot
fixing slot
02
Pre-drilled
fixing holes
fixing holes
03
Honeycomb design
for strength and
reduced weight
for strength and
reduced weight
04
Butyl backing to help seal
fixing penetrations
fixing penetrations
05
Full-length
drainage channel
drainage channel
190 × 35 × 30 mm / Polypropylene / Integrated butyl backing / Patent pending
01
Clearance fixing slot
02
Pre-drilled fixing holes
03
Honeycomb design for strength and reduced weight
04
Butyl backing to help seal fixing penetrations
05
Full-length drainage channel
INSTALLATION DETAILS
See how the layers come together.

Fixing-point detail

Roof supports and spacers

Roof assembly layers
Conceptual installation illustrations.
ONE COMPONENT. THREE CORE FUNCTIONS.
01 / VENTILATE
VENTILATE
Creates 30 mm separation that gives air room to move through the designed roof or wall cavity.
02 / DRAIN
DRAIN
Provides a pathway for incidental moisture to move through and exit the cavity.
03 / PROTECT
PROTECT
Integrated butyl backing helps seal membrane penetrations around the fixing point.
FOR THE PEOPLE WHO BUILD & DESIGN
One product.
Different priorities.
For builders
Less handling at the fixing point. A clear installation sequence. Cavity details you can inspect before they are covered.
For architects
Consistent geometry and integrated sealing make the roof or wall detail easier to specify and communicate.
For building designers
Connect roof and wall sections, condensation requirements and construction notes in a detail the site team can follow.
WHY PERFORMANCE BATTENS?
ONE SMALL COMPONENT.
THREE IMPORTANT JOBS.
CREATE THE CAVITY
Consistent 30 mm separation between the membrane and outer construction layers supports a defined cavity.
HELP MANAGE MOISTURE
Space for ventilation and drainage helps incidental moisture move towards the intended exit through the building envelope.
SEAL THE FIXING
Integrated butyl backing helps seal the membrane penetration created during fastening.
Ready to position
Short, lightweight modules arrive in boxes of 100. Position them at the specified fixing points without measuring and cutting long counter-batten lengths.
ONE SYSTEM / TWO APPLICATIONS
ROOF + WALL
ROOF APPLICATIONS
Create ventilation and drainage separation beneath roof assemblies while providing an integrated sealing interface at fixing penetrations.
WALL APPLICATIONS
Create a defined drained and ventilated cavity between the membrane and cladding support system.
DRIER ASSEMBLIES / LONGER-TERM THINKING
Manage moisture before
it becomes a building problem.
Give incidental moisture a route out. PB30 creates space at the fixing locations for drainage and air movement, helping you bring a clear moisture-management detail to the build.
PERFORMANCE BATTEN
THE SPECIFICATION.
WITHOUT THE COMPLEXITY.

Black polypropylene. Consistent moulded geometry. Integrated butyl backing.
Product type
Counter batten / cavity spacer
Material
Polypropylene
Dimensions
190 × 35 × 30 mm
Cavity height
30 mm
Seal
Integrated butyl backing
Applications
Roof / wall
Moisture resistance
Highly moisture resistant
Pack quantity
100 pieces
Colour
Black
Patent status
Patent pending
INSTALLATION
PEEL. STICK. FIX + SEAL.
01
PEEL
Peel the release liner from the butyl backing to expose the adhesive. Keep the batten ready to position with the butyl facing the membrane.
02
STICK
Position the Performance Batten on the membrane at the fixing location. Press the exposed butyl backing onto the membrane to hold the spacer in place.
03
FIX + SEAL
Fix the spacer through the round holes, then fasten the support batten through the elongated slot into the underlying structure. Batten pressure compresses the butyl to help seal the penetration.
LESS HANDLING / MORE PROGRESS
LESS TIME HANDLING BATTENS.
MORE TIME BUILDING.
Ready-to-position 190 mm modules avoid cutting long counter-batten lengths into individual spacers. Integrated butyl backing keeps the spacer and fixing seal together, ready for installation.
The lightweight polypropylene body is highly moisture resistant. Together with integrated butyl backing, it brings cavity separation and fixing-point sealing into one ready-to-position component.
Built around the detail.


POLYPROPYLENE
MADE FOR THE BUILDING ENVELOPE.
Highly moisture-resistant polypropylene keeps the component lightweight and allows consistent, precision-moulded geometry. Integrated butyl backing brings the cavity spacer and fixing seal together.
LOCAL AVAILABILITY
Find out when PB30 is available in your area.
Join our mailing list for local product availability updates, plus free articles and practical guides.
PERFORMANCE BATTENS
Build the cavity.
Protect the detail.
Bring cavity separation and fixing-point sealing together in your roof or wall detail.
190 × 35 × 30 mm · Polypropylene · Butyl backed · 100 per box · Patent pending
Getting the best from PB30
For the best result, use PB30 within your approved roof or wall detail, with structural support battens, compatible membranes and specified fixings. Your project team can coordinate the adopted NCC requirements, drainage, ventilation and fire requirements for the building and climate. Specialist recycling options depend on local acceptance of black polypropylene with butyl backing.